Steinbach Steinbach

Steel wall pool Styria oval without accessories

Art.
  • Galvanised, coated steel shell
  • Steel wall connection with plug-in profile
  • Plastic handrail and bottom rails
  • strong winter-proof inner foil
  • Skimmer and nozzle punching

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

* Mandatory Field

from €1,190.00
incl. VAT, free shipping
Only %1 left

Only items left in stock

The minimum order quantity is 1

Product information

The steel wall pools of the "Styria" series are the most robust and strongest pools in this class. Not only the strong steel wall (approx. 0.80 mm at a depth of 150 cm), but also the winter-proof inner liner (liner colour adria blue: approx. 0.60 mm and liner colour sand: approx. 0.80 mm) allow year-round use. Disassembly in winter is not necessary. Punched holes for skimmer and inlet nozzle are already available. The "Styria" series in oval is only suitable for underground installation. A foundation plate and retaining walls on the long sides are required.
The *Skimmer set S1 is the optimal preparation for the circulation of your pool water. For the "Styria" series in oval with the pool size of 490 x 300 x 120 cm we recommend the *Steinbach filter unit Classic 250N or the *Steinbach filter unit Active Balls+.  For all steel wall pools of the "Styria" Series in oval with a pool height of 150 cm and the pool size 800 x 400 x 120 we recommend the *Steinbach filter unit Compact 8. The *Steinbach filter unit Classic 400 is recommended for the pool sizes 625 x 360 x 120 and 737 x 360 x 120. These Steinbach filter units are perfectly matched to the "Styria" series in oval and ensure crystal-clear pool water.
(* not included in delivery)

Pool shape: oval
Product dimension: 490 x 300 x 120 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation
Water capacity: 13.800 l
Water filling height: 110 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Material thickness steel wall: 0,60 mm
Liner thickness bottom: 0,80 mm
Liner thickness wall: 0,80 mm
Color of inner liner: sand
Assembly min. number of persons: 2 - 4
Assembly time approx.: 420 - 540 min
Filter unit: no
Number of skimmers: no
Inlet nozzle: no
Hoses: no
Ladder: no
Pool cover: no
Floor protection cover: no
Cleaning kit: no

FAQs from category Steel wall pools oval:

For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.

All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.

It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.

It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.

Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.

To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.

The additional concrete shell prevents damage to the steel shell when there is no water in the pool.

So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.

Important information

Important Information: The scope of delivery of the item does not include all the material required for assembly and operation.
Depending on the type of construction or the item in question, the following may be required for assembly: leveling material sand/split, floor insulation, cove (Styrofoam wedges item no. 016041), etc.
A filtration system and water treatment chemicals are required for operation. A heat pump or a solar collector for heating increases comfort. You can find more detailed information in the respective operating instructions, on our YouTube channel or in our online shop: https://www.steinbach-group.com/en/, https://www.youtube.com/@Steinbachgroup
This pool is only suitable for complete in-ground installation. A freestanding or partial in-ground installation is not possible. Note that in the case of complete in-ground installation the pool wall must be statically protected against earth pressure. Please refer to the operating instructions for details on how to do this.
In order to be able to set up the pool as quickly as possible, we recommend three persons if possible. The assembly time depends on the number and qualification of the people involved. PLEASE NOTE: Steel wall pools are not suitable for saltwater use due to the risk of rusting.

Caution

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Symbol photos

The pictures shown are just for reference, the actual product may differ.