Steinbach
Steel wall pool New Splasher Secure
- Robust, coated steel shell
- Plastic handrail and rails
- Suspended cartridge filter system
- Ladder with removable steps
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The "New Splasher Secure" series is considered the perfect entry-level model in the field of steel shell pools. The coated steel shell pools are quick and easy to assemble and are characterised by their excellent price-performance ratio. With the suspended cartridge filter system included in the scope of delivery, everything is already in place for optimal cleaning. The safety ladder included not only offers you a comfortable way to get in and out, but also protects you from unauthorised access to the pool with its removable steps. The steel wall pools of the "New Splasher Secure" series are not intended for installation. Refreshment, fun and good humour for the whole family are guaranteed with these steel wall pools.
Pool form: round
Product dimension: Ø 350 x 90 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: freestanding
Water capacity: 7.800 l
Water filling height: 80 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Material thickness steel wall: 0,30 mm
Liner thickness bottom: 0,30 mm
Liner thickness wall: 0,30 mm
Color of inner liner: grey
Assembly min. number of persons: 2 - 4
Assembly time approx.: 180 - 300 min
Filter unit: Hook-in cartridge filter unit, Circulation capacity 1.700 l/h
Number of skimmers: no
Inlet nozzle: no
Hoses: no
Ladder: yes
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs for Steel wall pool New Splasher Secure:
Due to the current swimming pool standard, a safety ladder must be included in the scope of delivery for above-ground pools with a height of 84 cm or more that cannot / must not be buried.
Due to the material thickness of the steel jacket, the skimmer would have to be supported from the outside. Furthermore, this modification of the steel jacket will invalidate any warranty.
FAQs from category Steel wall pools round:
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.