Airbeds
Airbeds with INTEX's patented Fiber-TechTM technology enable a high level of comfort while sleeping. The beds are quickly and easily inflated and can be stored and transported to save space. At Steinbach you will find a wide selection of airbeds for one or more people.
Frequently asked questions for Airbeds:
The approximate size of the inflated air bed is shown on the carton of the INTEX air bed. INTEX always measures the maximum dimensions (outside-outside) and not the lying area alone. Make sure the air bed is adequately inflated before measuring. Also take into account the side bulge, whichever side you measure on. All sizes are approximate values that depend on pressure, temperature, etc. A measurement deviation +/- is entirely possible, due to manufacturing and material.
Make sure that the airbed actually has a hole. Expansion is a natural property of new vinyl. Especially in the beginning, the bed may expand, and to the customer it may seem like it is losing air. It simply stretches under your body weight, the temperature difference, etc., which is normal for the first use. To check for holes in the mattress, make sure the plug and cap are tight and securely closed, replace if necessary. To check for holes in the mattress, use liquid soap, put it in a water bottle and spray it on the seams. If there is a hole it will bubble. (Detergent or washing up liquid will not work as they do not have a bubbling effect). After you have found the hole, clean and dry the area, removing the flocked surface with a fine sandpaper if necessary. Then apply the repair patch to the area to be repaired.
The repair patch is intended for vinyl surfaces only. However, fine sandpaper can be used to gently rub the velour. Then clean this area with nail polish remover. Then the repair patch should hold.
The airbed can be washed with mild soap and water. Use a sponge or a soft brush to wash the airbed. Rinse thoroughly and dry. Do not use the airbed in water. Water penetration can be harmful to some materials used in the manufacture of the coating. DO NOT wash the airbed in the washing machine.
Air beds can be placed on any usable slatted frame. However, you will get the best result on a firm base.
Airbeds
The airbeds are quickly inflated with an air pump. The already integrated electric air pumps are powerful and make the bed quickly ready for use. Please note that the ambient temperature affects the air in the mattress. The lower the outside temperature, the more the air contracts. The higher the ambient temperature, the more the air expands. Let air out or add air if necessary. Please note that new air beds expand at the beginning.
Cleaning of the air beds
Cleaning of the air beds: To clean the surface of the airbeds, please use only mild soap and water with a soft sponge or rag.
Tip for small holes
When positioning the inflatable bed, make sure that the surface is smooth, level, not too rough and that there are no sharp objects on it, as this could damage the bed. It is advisable to place a carpet or mat underneath to protect the underside. You can quickly repair small cracks and the like yourself to extend the life of the airbed. Use a liquid soap in a container with spray function to locate the holes. If there are holes at the seams, this will cause bubbles to form. If you find a crack, clean the area.
You can use the self-adhesive vinyl repair kit from INTEX to repair cuts. It contains 6 pieces of patches of 7 x 7 cm each and is specially designed for inflatable articles. The leak is sealed again quickly and easily. Should the patches not stick as desired, treat the area with fine sandpaper and nail polish remover.
At Steinbach you will find a wide range of inflatable mattresses in various sizes with Fiber-TechTM technology for a high level of comfort.