Whirlpools
INTEX inflatable whirlpools are the perfect pools for everyone who has always been looking for the spa feeling in their own garden or on the terrace. Air nozzles and high-performance jet nozzles in combination with warm water up to a maximum of 40 degrees ensure a full-body massage and pure relaxation. Whirlpools offer the luxury of wellness at home. A powerful bubble device creates flowing water, so-called bubbles, and the warm water ensures relaxation. You can easily achieve a targeted massage or a full body massage with the massage functions of the whirlpool. According to the motto: whirlpool on and everyday life off.
Frequently asked questions for Whirlpools:
Whirlpools must be placed outdoors on a level location. The area must be free of branches, stones, sharp and pointed objects. The location must be stable and weight-resistant (not on a balcony or terrace). Before setting up, double check that the whirlpool will stand on a completely flat, level surface, as otherwise the connections may not seal 100%.
1. Turn off the spa control unit.
2. Connect the drain valve adapter to a garden hose. Place the other end of the garden hose in a suitable place for water disposal.
3. Remove the cap from the outer drain valve and attach the drain valve adapter to the drain valve.
4. Open the cover for the drain valve inside the whirlpool tub. The water begins to flow out through the garden hose.
5. When the water has drained out, disconnect the whirlpool control unit from the wall of the whirlpool tub. Lift the whirlpool tub wall on the opposite side from the drain to direct any remaining water down the drain and allow you to completely drain the whirlpool.
6. Attach the filling hose to the air blower valve on the control unit.
7. Turn on the whirlpool and press the button. Align the filling hose with the inlet/outlet of the spa pool and the spa control unit so that the water in the pipes dries out.
8. Use a clean towel to soak up the remaining water and moisture from spa and control unit.
9. When the whirlpool is empty, remove the filter housing from inside the spa and clean or replace the filter cartridge. Only use commercially available bathroom cleaners for cleaning. Rinse the whirlpool well with clear tap water.
10. Make sure that the control unit and the spa tub are thoroughly dry.
11. After the spa is completely dry, vacuum out any remaining air. Note that some air still remains in the tub. The tub should not be completely "evacuated" so that the air and jet lines are not compressed.
12. Fold the whirlpool loosely and avoid sharp corners to prevent damage. Packing into the bag may require 2-3 people.
NOTE: The included caps can be used to cover the water inlet and outlet fittings inside the spa. This prevents water from flowing out.
The whirlpool models from 2020 cannot be retrofitted with WLAN. The complete control unit and the display would have to be replaced with the components from 2021. The outdoor whirlpool models from 2021 are WLAN-capable.
All INTEX whirlpool models should never be inflated with external compressors or pumps. Please only use the control unit supplied for this purpose. Please also note the information in the operating instructions of the respective product.
The outdoor whirlpools are not winterproof. In areas where there is a risk of frost, the spa and all associated components should be drained, cleaned, disassembled and correctly stored indoors if the temperature drops below 5°C.
Whirlpools
The inflatable Pure SPA whirlpools from INTEX are available in a round or octagonal shape. Both models have an integrated limescale protection system that helps to prevent limescale deposits and thus minimises cleaning. The service life of the whirlpool increases due to the reduction of limescale deposits. With the limescale protection system, limescale cannot deposit on the filter pump or the heater and thus prevents heat loss. pH preparations, disinfectants and hardness stabilisers, which provide additional protection against limescale, are recommended for water treatment of the round model.
The octagonal "All in one" combi model is based on a salt water system. The advantage of salt water whirlpools is that you hardly need any chemical cleaning agents for water treatment. The salt disinfects the bathing water and so you don't need chlorine or other disinfectants to inhibit the growth of bacteria, viruses and the like. Salt water is soft, does not irritate the eyes or skin, and with an ideal salt concentration of about 0.4 percent, it is not comparable to seawater, which has a salt content of 3.5 percent.
Cartridge filter systems are suitable for optimum filtration of the pool water of both whirlpool models.
The correct water temperature in the whirlpool
38 degrees is approximately the optimum water temperature for your whirlpool. Do not exceed 40 degrees. Please note that warm water can cause fatigue and dizziness. Do not immerse yourself completely in order to "keep a cool head".