Ladder accessories

Remove the ladder from the pool after each use, rinse it with clean tap water and dry it thoroughly with a soft, lint-free towel, paying attention to the areas in between. 
Regularly check the dissolved salts in the water if an electrolysis system is used and make sure that the pH value and the disinfectant are set correctly. To avoid deposits on the underwater accessories, ensure that the water is circulated daily.
Avoid using water care products or shock chlorination in the vicinity of the ladder and ensure that no splashes or deposits form on or around the ladder.
Keep metal parts free of substances such as salts, dust and dirt and avoid contact with other metal parts, especially iron or concrete. 
For salt water operation, you need a zinc plate for potential equalisation to prevent rust formation. Ensure correct installation and replace the zinc plate after each season.

The load capacity of ladders can vary depending on the model. It is between 136 kg - 150 kg. Check the product specifications of the model.

The maximum load weight must not be exceeded.

No, floor protection mats are not suitable for preparing the surface of pools. Floor protection mats made from materials such as: PE, are not stable enough. They serve as additional protection and comfort around the pool area. They can be placed under ladders, for example.