Above ground pool ladder
With above-ground pool ladders, make sure you have a level standing surface to guarantee the stability of the ladder. They are set up and do not need to be screwed down. Above-ground pool ladders are available from Steinbach with 4 or 5 external steps as well as 2 steps that protrude into the pool water for easy access, even for higher pools.
Frequently asked questions for Above ground pool ladder:
Stainless steel pool ladders are rustproof, but not rust-resistant. When using pool ladders in a salt water pool, a zinc plate should always be used. The zinc plate serves as potential equalisation for stainless steel ladders in connection with salt water disinfection. It prevents rusting and helps prevent corrosion of your stainless steel ladder.
Mounting the zinc plate (art. no. 018259): Screw the zinc plate to the outside of your stainless steel ladder. The installation must be done on the inside of the pool and below the water level. Make sure that the zinc plate is renewed every season.
Remove the ladder from the pool after each use, rinse it with clean tap water and dry it thoroughly with a soft, lint-free towel, paying attention to the areas in between.
Regularly check the dissolved salts in the water if an electrolysis system is used and make sure that the pH value and the disinfectant are set correctly. To avoid deposits on the underwater accessories, ensure that the water is circulated daily.
Avoid using water care products or shock chlorination in the vicinity of the ladder and ensure that no splashes or deposits form on or around the ladder.
Keep metal parts free of substances such as salts, dust and dirt and avoid contact with other metal parts, especially iron or concrete.
For salt water operation, you need a zinc plate for potential equalisation to prevent rust formation. Ensure correct installation and replace the zinc plate after each season.
The load capacity of ladders can vary depending on the model. It is between 136 kg - 150 kg. Check the product specifications of the model.
The maximum load weight must not be exceeded.
No, floor protection mats are not suitable for preparing the surface of pools. Floor protection mats made from materials such as: PE, are not stable enough. They serve as additional protection and comfort around the pool area. They can be placed under ladders, for example.