Frame Pool Set Ultra Quadra XTR 732 x 366 x 132 cm - Gültig / Valid 01.01.2019 - 31.12.2019
Art.
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
01
![Plastic clip, Ultra Quadra/Oval Frame Pool]()
02
![Horizontale Stange A, L=1200 mm für Ultra Quadra]()
03
![Horizontale Stange B, L=1200 mm für Ultra Quadra]()
04
![Horizontale Stange C, L=1115 mm für Ultra Quadra]()
05
![Horizontale Stange D, L=1100 mm für Ultra Quadra]()
06
![Horizontale Stange E, L=1110 mm für Ultra Quadra]()
07
![Horizontale Stange F, L=1016 mm für Ultra Quadra]()
08
![Elbow connector for Ultra Quadra]()
10
![V-shaped clip L=75 mm]()
11
![U-shaped side support for Ultra Quadra]()
12
![Connecting rod L=305 mm]()
13
![PVC transition liner for Ultra Quadra]()
14
![Ground tarp for Ultra rectangular 732x366x132 cm]()
15
![Poolfolie für Ultra Quadra 732 x 366 x 132 cm]()
16
![Discharge mechanism with hose connection]()
17
![End cap for drain valve for pools higher then 107 cm]()
18
![Cover for Frame Pool Set Ultra Quadra 732x366x132 cm]()
20
![Plastic insert for elbow connector]()
21
![Plastic insert for horizontal poles]()
At the moment this product is not available
Please choose your model
1
![Plastic pin L=63 mm]()
2
![U-Bolzen für Volleyball Set]()
3
![Muttern M5]()
4
![Sicherungsschraube Kunststoff]()
5
![Schraube Volleyball Set]()
6
![Gummischutz]()
7
![Halterung Volleyball Set]()
8
![Haltestange Volleyball Set]()
9
![Volleyaballset Endkappe]()
10
![Volleyballnetzbefestigung]()
11
![Volleyballnetz für 9'X18'X52" & 12'X24'X48" Rechteck]()
12
![Volleyball]()
01
![Seal for hose connection]()
02
![Sealing ring Ø 38 x 3 mm]()
03
![Cover for vacuum container]()
04
![Dirt bag]()
05
![Vacuum container]()
06
![Floating skimmer container]()
07
![Plastic ring, Ø 200 mm]()
08
![Handle for skimmer basket]()
09
![Skimmer basket]()
10
![Skimmer container]()
11
![Fastening screw]()
12
![Height adjustment mechanism]()
13
![Bracket (only for Easy Set Pool and Oval Frame Pool)]()
14
![Arm (only for Easy Set Pool and Oval Frame Pool)]()
15
![Bracket for Frame Pool series, used as of 2012]()
16
![Bracket for Frame Pool Set Wood, used as of 2009]()
17
![Skimmer connection hose L=78 cm, Ø 40 mm]()
18
![Hose connection adapter B]()
19
![Floor cleaner, plastic]()
20
![Connection piece]()
21
![V-shaped clip L=55 mm]()
22
![Plastic pin, L=56 mm]()
23
![Replacement brush for floor cleaner, plastic]()
At the moment this product is not available
24
![Floor scooper net]()
25
![Pool brush]()
26
![Swimming pool hose Ø 32 mm]()
27
![Hose clamp Ø 25 - 42 mm]()
28
![Telescopic pole, aluminum, for cleaning set Deluxe]()
1
![Seal for hose connection]()
2
![Sealing ring Ø 38 x 3 mm]()
3
![Cover for vacuum container]()
4
![Dirt bag]()
5
![Vacuum container]()
6
![Skimmer cover, floating]()
7
![Plastic ring, Ø 200 mm]()
8
![Handle for skimmer basket]()
9
![Skimmer basket]()
10
![Skimmer container]()
11
![Fastening screw]()
12
![Height adjustment mechanism]()
13
![Bracket (only for Easy Set Pool and Oval Frame Pool)]()
14
![Arm (only for Easy Set Pool and Oval Frame Pool)]()
15
![Bracket for Frame Pool series, used as of 2012]()
16
![Bracket for Frame Pool Set Wood, used as of 2009]()
17
![Skimmer connection hose L=78 cm, Ø 40 mm]()
18
![Hose connection adapter B]()
19
![Floor cleaner, plastic]()
20
![Connection piece]()
21
![V-shaped clip L=55 mm]()
22
![Plastic pin, L=56 mm]()
23
![Replacement brush for floor cleaner, plastic]()
24
![Floor scooper net, plastic]()
25
![Pool brush, plastic]()
26
![Swimming pool hose Ø 32 mm]()
27
![Hose clamp Ø 25 - 42 mm]()
28
![Telescopic pole, aluminum Ø 31 mm]()
01
![U-shaped top handrail for ladder height 122 cm & 132 cm]()
02
![Platform, as of model 2016]()
03
![Fastener, as of model 2016]()
04
![Screw fitting, M6x35 mm]()
05
![Long screws for struts]()
06
![A-side - top side pole (marked "A")]()
07
![A-side - top side pole (marked "B")]()
08
![A side - J-shaped leg (marked "A")]()
09
![A side - J-shaped leg (marked "B")]()
10
![Step, gray]()
11
![Anchor bushing for step]()
12
![B-side - top side pole (marked "A1")]()
13
![B-side - top side pole (marked "B1")]()
14
![B-side - bottom side pole (marked "A1")]()
15
![B-side - bottom side pole (marked "B1")]()
16
![C-side - top side pole (marked "C")]()
17
![C-side - bottom U-shaped side pole (marked "C")]()
18
![Base support]()
01
![U-shaped handrail top edge for ladder height 122 cm & 132 cm]()
02
![Platform, as of model 2016]()
03
![Fastener, as of model 2016]()
04
![Screw fitting, M6x35 mm]()
05
![Long screws for struts]()
06
![A-side - top side pole (marked "A")]()
07
![B SIDE-UPPER SIDE LEG (MARKED "B") FOR 52" GREY TWO-SECTION/]()
08
![A SIDE-LOWER SIDE LEG (MARKED "A") FOR 52" GREY TWO-SECTION/]()
09
![B SIDE-LOWER SIDE LEG (MARKED "B") FOR 52" GREY TWO-SECTION/]()
10
![Step, gray]()
11
![Anchor bushing for step]()
12
![B-side - top side pole (marked "A1")]()
13
![B-side - top side pole (marked "B1")]()
14
![B SIDE LOWER SIDE LEG (MARKED "A1") FOR 52" REMOVABLE STEPS]()
15
![B SIDE LOWER SIDE LEG (MARKED "B1") FOR 52" REMOVABLE STEPS]()
16
![C SIDE UPPER LEG (MARKED "C") FOR 52" REMOVABLE STEPS LADDER]()
17
![C-side - bottom U-shaped side pole (marked "C")]()
18
![Base support]()
01
![Manometer]()
02
![6-way valve]()
03
![End cap 2" internal thread]()
04
![Seal between 6-way valve and filter container]()
05
![Screw for locking ring, M6 x 60 mm]()
06
![Locking ring, Ø 180 mm]()
07
![Sand filling aid, Ø 195 mm]()
08
![Middle riser pipe, L=380 mm]()
09
![Screw fitting for container drain]()
10
![Discharge valve seal, Ø 24 x 3 mm]()
11
![Filter arm, L=75 mm]()
14
![Screw fitting for filter cover, transparent]()
15
![Filter cover o-ring, Ø 155 x 5 mm]()
16
![Filter basket, Ø 140 mm]()
17
![Nut/screw fitting for filter housing]()
18
![L-shaped sealing ring]()
19
![Bleed/drain valve]()
20
![O-ring for bleed/drain valve]()
21
![Flow sensor]()
22
![Container for titanium electrode]()
23
![Titanium electrode for ECO-15220-1 CG-28676]()
24
![E.C.O. Electrode for ECO-15220-1 CG-28676]()
25
![Prefilter unit, including prefilter basket, cover, seal]()
26
![Pumpmotor & control unit for ECO15220-1 CG-28676]()
27
![L-shaped o-ring, Ø 56 mm]()
34
![Adjustable injection nozzle]()
40
![Sand filter cover, used as of 2012]()
41
![Screw fitting for electrolytic storage cell housing]()
42
![O-ring for titanium electrode]()
43
![Housing for electrode for ECO20220-1 CG-28680]()
44
![O-ring for prefilter unit, Ø 60 x 4 mm]()
45
![Screw fitting for cell for 128676 and 128680]()
46
![Filter vessel Ø 14"]()
47
![Base plate for filter vessel Ø 14"]()
48
![O-ring for titanium electrode, Ø 68 x 3 mm]()
50
![Air nozzle valve]()
51
![Through-piece for water vitalization nozzle set 112354]()
28*
![INTEX gate valve]()
29*
![Sealing ring Ø 38 x 3 mm]()
30*
![Sealing ring, gate valve/screw fitting]()
31*
![Nut for screw-on filter connector]()
31*+32*+34+50+51+54*
![Hydro Aeration Set 1050]()
32*
![Gasket for screw-on filter connector]()
33*
![Screw-on filter connector, used as of 2013]()
35*
![Retracted adapter B]()
36*
![Screen connection/through-piece]()
37*
![1-1/4" POOL INL]()
38*
![Small strainer for through-hole, as of model 2016]()
49*
![Large strainer for through-hole, as of model 2016]()
52*
![Inlet screen connection 1 1/4"]()
53*
![Adapter for water vitalization nozzles]()
54*
![End cap for air valve]()
01
![Manometer]()
02
![6-way valve]()
03
![End cap 2" internal thread]()
04
![Seal between 6-way valve and filter container]()
05
![Screw for locking ring, M6 x 60 mm]()
06
![Locking ring, Ø 180 mm]()
07
![Sand filling aid, Ø 195 mm]()
08
![Middle riser pipe, L=380 mm]()
09
![Screw fitting for container drain]()
10
![Discharge valve seal, Ø 24 x 3 mm]()
11
![Filter arm, L=75 mm]()
14
![Screw fitting for filter cover, transparent]()
15
![Filter cover o-ring, Ø 155 x 5 mm]()
16
![Filter basket, Ø 140 mm]()
17
![Nut/screw fitting for filter housing]()
18
![L-shaped sealing ring]()
19
![Bleed/drain valve]()
20
![O-ring for bleed/drain valve]()
21
![Flow sensor]()
22
![Container for titanium electrode]()
23
![Titanium electrode for ECO-15220-1 CG-28676]()
24
![E.C.O. Electrode for ECO-15220-1 CG-28676]()
25
![Prefilter unit, including prefilter basket, cover, seal]()
26
![Pump and control ECO15220]()
27
![L-shaped o-ring, Ø 56 mm]()
40
![Sand filter cover, used as of 2012]()
41
![Screw fitting for electrolytic storage cell housing]()
42
![O-ring for titanium electrode]()
43
![Housing for electrode for ECO20220-1 CG-28680]()
44
![O-ring for prefilter unit, Ø 60 x 4 mm]()
45
![Screw fitting for cell for 128676 and 128680]()
46
![Filter vessel Ø 14"]()
47
![Base plate for filter vessel Ø 14"]()
48
![O-ring for titanium electrode, Ø 68 x 3 mm]()
28*
![INTEX gate valve]()
29*
![Sealing ring Ø 38 x 3 mm]()
30*
![Sealing ring, gate valve/screw fitting]()
31*
![Nut for screw-on filter connector]()
32*
![Gasket for screw-on filter connector]()
33*
![Screw-on filter connector, used as of 2013]()
34*
![Adjustable inlet nozzle for INTEX pools with gate valve]()
35*
![Retracted adapter B]()
36*
![Screen connection/through-piece]()
37*
![Inlet nozzle, rigid]()
38*
![Small strainer for through-hole, as of model 2016]()
49*
![Large strainer for through-hole, as of model 2016]()