Frame Pool Set Ultra Quadra XTR 549 x 274 x 132 cm - Gültig / Valid 01.01.2019 -
Art.
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
01
![Plastic clip, Ultra Quadra/Oval Frame Pool]()
02
![Horizontal pole A, L=1305 mm for Ultra Quadra]()
03
![Horizontal pole B, L=1225 mm for Ultra Quadra]()
04
![Horizontal pole C, L=1220 mm for Ultra Quadra]()
05
![Horizontal pole D, L=1150 mm for Ultra Quadra]()
07
![Horizontal pole F, L=1067 mm for Ultra Quadra]()
08
![Elbow connector for Ultra Quadra]()
10
![V-shaped clip L=75 mm]()
11
![U-shaped side support for Ultra Quadra]()
12
![Connecting rod L=305 mm]()
13
![PVC transition liner for Ultra Quadra]()
14
![Ground tarp for Frame Pool Set Ultra Quadra 549x274x132 cm]()
15
![Pool liner for Ultra Quadra 549 x 274 x 132 cm]()
16
![Discharge mechanism with hose connection]()
17
![End cap for drain valve for pools higher then 107 cm]()
18
![Cover for Frame Pool Set Ultra Quadra 549x274x132 cm]()
20
![Plastic insert for elbow connector]()
21
![Plastic insert for horizontal poles]()
Please choose your model
01
![U-shaped top handrail for ladder height 122 cm & 132 cm]()
02
![Platform, as of model 2016]()
03
![Fastener, as of model 2016]()
04
![Screw fitting, M6x35 mm]()
05
![Long screws for struts]()
06
![A-side - top side pole (marked "A")]()
07
![A-side - top side pole (marked "B")]()
08
![A side - J-shaped leg (marked "A")]()
09
![A side - J-shaped leg (marked "B")]()
10
![Step, gray]()
11
![Anchor bushing for step]()
12
![B-side - top side pole (marked "A1")]()
13
![B-side - top side pole (marked "B1")]()
14
![B-side - bottom side pole (marked "A1")]()
15
![B-side - bottom side pole (marked "B1")]()
16
![C-side - top side pole (marked "C")]()
17
![C-side - bottom U-shaped side pole (marked "C")]()
18
![Base support]()
01
![U-shaped handrail top edge for ladder height 122 cm & 132 cm]()
02
![Platform, as of model 2016]()
03
![Fastener, as of model 2016]()
04
![Screw fitting, M6x35 mm]()
05
![Long screws for struts]()
06
![A-side - top side pole (marked "A")]()
07
![B SIDE-UPPER SIDE LEG (MARKED "B") FOR 52" GREY TWO-SECTION/]()
08
![A SIDE-LOWER SIDE LEG (MARKED "A") FOR 52" GREY TWO-SECTION/]()
09
![B SIDE-LOWER SIDE LEG (MARKED "B") FOR 52" GREY TWO-SECTION/]()
10
![Step, gray]()
11
![Anchor bushing for step]()
12
![B-side - top side pole (marked "A1")]()
13
![B-side - top side pole (marked "B1")]()
14
![B SIDE LOWER SIDE LEG (MARKED "A1") FOR 52" REMOVABLE STEPS]()
15
![B SIDE LOWER SIDE LEG (MARKED "B1") FOR 52" REMOVABLE STEPS]()
16
![C SIDE UPPER LEG (MARKED "C") FOR 52" REMOVABLE STEPS LADDER]()
17
![C-side - bottom U-shaped side pole (marked "C")]()
18
![Base support]()
01
![Manometer, model SF90220T/SF90220RC, 28644]()
02
![6-way valve]()
03
![End cap 2" internal thread]()
04
![Locking ring, Ø 265 mm]()
05
![Filter vessel o-ring, SF90220T/SF90220RC]()
06
![O-ring A, Ø 53 x 3 mm]()
07
![Middle riser pipe, L=240 mm]()
08
![Plastic filter disk, Ø 160 mm]()
09
![Screw fitting for container drain]()
10
![Discharge valve seal, Ø 24 x 3 mm]()
11
![L-shaped sealing ring]()
12
![Connection hose with screw fitting 2" internal thread, L=4500 cm]()
13
![Sandfilter-Verbindungsschlauch]()
15
![Air nozzle valve]()
16
![Pin for locking ring]()
17
![Screw fitting for locking ring]()
18
![Through-piece for water vitalization nozzle set 112354]()
19
![Transparent prefilter]()
20
![Pumpenmotor]()
24
![Nut for screw-on filter connector]()
25
![Gasket for screw-on filter connector]()
27
![Adjustable injection nozzle]()
32
![Filter vessel Ø 10"]()
33
![Base plate for filter vessel Ø 10"]()
34
![End cap for air valve]()
35
![Air outlet valve B, with o-ring]()
36
![O-ring for bleed/drain valve]()
01
![Manometer, model SF90220T/SF90220RC, 28644]()
02
![6-way valve]()
03
![End cap 2" internal thread]()
04
![Locking ring, Ø 265 mm]()
05
![Filter vessel o-ring, SF90220T/SF90220RC]()
06
![O-ring A, Ø 53 x 3 mm]()
07
![Middle riser pipe, L=240 mm]()
08
![Plastic filter disk, Ø 160 mm]()
09
![Screw fitting for container drain]()
10
![Discharge valve seal, Ø 24 x 3 mm]()
11
![L-shaped sealing ring]()
13
![Connection hose with screw fitting 2" internal thread]()
14
![Transparent sight glass for 6-way valve]()
15
![O-ring for sight glass]()
16
![Pin for locking ring]()
17
![Screw fitting for locking ring]()
18
![L-shaped o-ring, Ø 56 mm]()
19
![Transparent prefilter]()
20
![Pumpenmotor]()
21
![INTEX gate valve]()
22
![Sealing ring Ø 38 x 3 mm]()
23
![Sealing ring, gate valve/screw fitting]()
24
![Nut for screw-on filter connector]()
25
![Gasket for screw-on filter connector]()
26
![Screw-on filter connector, used as of 2013]()
27
![Adjustable injection nozzle]()
32
![Filter vessel Ø 10"]()
33
![Base plate for filter vessel Ø 10"]()
34
![Screws for transparent adapter]()
35
![Air outlet valve B, with o-ring]()
36
![O-ring for bleed/drain valve]()
37
![Large strainer for through-hole, as of model 2016]()
38
![Air nozzle valve]()
39
![Through-piece for water vitalization nozzle set 112354]()
42
![End cap for air valve]()
28*
![Retracted adapter B]()
29*
![Screen connection/through-piece]()
30*
![1-1/4" POOL INL]()
31*
![Small strainer for through-hole, as of model 2016]()
40*
![Adapter for water vitalization nozzles]()
41*
![Inlet screen connection 1 1/4"]()
01
![Manometer, model SF90220T/SF90220RC, 28644]()
02
![6-way valve with filter vessel top part, SF90220T/SF90220RC]()
At the moment this product is not available
03
![End cap 2" internal thread]()
04
![Locking ring, Ø 265 mm]()
05
![Filter vessel o-ring, SF90220T/SF90220RC]()
06
![O-ring A, Ø 53 x 3 mm]()
07
![Middle riser pipe, L=240 mm]()
08
![Plastic filter disk, Ø 160 mm]()
09
![Screw fitting for container drain]()
10
![Discharge valve seal, Ø 24 x 3 mm]()
11
![L-shaped sealing ring]()
13
![Connection hose with screw fitting 2" internal thread]()
14
![Transparent sight glass for 6-way valve]()
15
![O-ring for sight glass]()
16
![Pin for locking ring]()
17
![Screw fitting for locking ring]()
18
![L-shaped o-ring, Ø 56 mm]()
19
![Transparent prefilter]()
20
![Pumpenmotor]()
21
![INTEX gate valve]()
22
![Sealing ring Ø 38 x 3 mm]()
23
![Sealing ring, gate valve/screw fitting]()
24
![Nut for screw-on filter connector]()
25
![Gasket for screw-on filter connector]()
26
![Screw-on filter connector, used as of 2013]()
27
![Adjustable injection nozzle]()
32
![Filter vessel Ø 10"]()
33
![Base plate for filter vessel Ø 10"]()
34
![Screws for transparent adapter]()
35
![Air outlet valve B, with o-ring]()
36
![O-ring for bleed/drain valve]()
37
![Large strainer for through-hole, as of model 2016]()
38
![Air nozzle valve]()
39
![Through-piece for water vitalization nozzle set 112354]()
42
![End cap for air valve]()
28*
![Retracted adapter B]()
29*
![Screen connection/through-piece]()
30*
![1-1/4" POOL INL]()
31*
![Small strainer for through-hole, as of model 2016]()
40*
![Adapter for water vitalization nozzles]()
41*
![Inlet screen connection 1 1/4"]()