Steinbach
All-in-One steel wall pool set Nuovo de Luxe II
- Inexpensive all-in-one set
- Robust steel wall pool
- Incl. filter system
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
For further details on the products included in the all-in-one set, please refer to the scope of delivery.
Steel wall pool Nuovo de Luxe II:
Product dimensions: Ø 360 x 120 cm
Suitable for salt water: no
Mounting options: ground installation, part installation, freestanding
Water capacity: 11.000 l
Water filling height: 110 cm
Liner thickness bottom: 0,40 mm
Liner thickness wall: 0,40 mm
Color of inner liner: grey
Assembly min. number of persons: 2 - 4
Assembly time approx.: 300 - 480 min
Number of skimmers: yes
Inlet nozzle: 1
Hoses: yes
Hose specification: 2x Fixed length 4,5 m, lugged 1,5 m each
Ladder: yes
Filter unit Comfort 50:
Filter system:
Circulations capacity: 6.600 l/h
Boiler size (ø): 415 mm
Connection size: Ø 32/38 mm
Valve type: 7-way valve with pressure gauge
Usable filter medium 1: quartz filter sand
Quantity of filter medium 1: 15 kg
Usable filter medium 2: Filter Balls Filter Wool Flakes
Quantity filter medium 2: 400 g
Filter pump:
Power supply: 220-240V~ / 50Hz
Input power maximum: 450 W
Transformer: no
Pump capacity: 8.500 l/h
Operating principle: self-priming
Pre-filter: yes
Timer: yes
Head: 9,00 m
FAQs from category Steel wall pools round:
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.