INTEX INTEX

Safety ladders for pools from 132 cm

128077
Art.
  • Safety ladder made of coated steel frame
  • Safety ladder with removable outer steps
  • Steps with anti-slip surface
  • Protective caps to prevent damage to the pool liner
  • Easy to set up, dismantle and store

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€169.00
incl. VAT, free shipping
In stock

Only items left in stock

Product information

Safety ladder with galvanized and coated steel frame is used for pools with a height of 122 - 132 cm. The anti-slip surface on the steps ensure a comfortable usage of the ladder. The steps on the outside of the ladder can be opened with 2 folding clasps and the steps can be put up easily. Children are not able to climb into the pool. The maximum weight is 136 kg.

Number of steps: 4 steps + 1 platform
Ladder suitable for pool height: 132 cm
Load capacity: 136 kg
Dimension: 130 x 84 x 182 cm
Suitable for salt water: yes

02 Platform, as of model 2016
€22.90
incl. VAT, excl. shipping
03 Fastener, as of model 2016
€0.99
incl. VAT, excl. shipping
04 Screw fitting, M6x35 mm
€0.99
incl. VAT, excl. shipping
05 Long screws for struts
€0.99
incl. VAT, excl. shipping
06 A-side - top side pole (marked "A")
07 A-side - top side pole (marked "B")
08 A side - J-shaped leg (marked "A")
€15.90
incl. VAT, excl. shipping
09 A side - J-shaped leg (marked "B")
€15.90
incl. VAT, excl. shipping
10 Step, gray
€8.99
incl. VAT, excl. shipping
11 Anchor bushing for step
€0.99
incl. VAT, excl. shipping
16 C-side - top side pole (marked "C")
18 Base support
€8.49
incl. VAT, excl. shipping
02 Platform, as of model 2016
€22.90
incl. VAT, excl. shipping
03 Fastener, as of model 2016
€0.99
incl. VAT, excl. shipping
04 Screw fitting, M6x35 mm
€0.99
incl. VAT, excl. shipping
05 Long screws for struts
€0.99
incl. VAT, excl. shipping
06 A-side - top side pole (marked "A")
10 Step, gray
€8.99
incl. VAT, excl. shipping
11 Anchor bushing for step
€0.99
incl. VAT, excl. shipping
18 Base support
€8.49
incl. VAT, excl. shipping

FAQs from category Safety ladder:

Stainless steel pool ladders are rustproof, but not rust-resistant. When using pool ladders in a salt water pool, a zinc plate should always be used. The zinc plate serves as potential equalisation for stainless steel ladders in connection with salt water disinfection. It prevents rusting and helps prevent corrosion of your stainless steel ladder.

Mounting the zinc plate (art. no. 018259): Screw the zinc plate to the outside of your stainless steel ladder. The installation must be done on the inside of the pool and below the water level. Make sure that the zinc plate is renewed every season.

Caution

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Symbol photos

The pictures shown are just for reference, the actual product may differ.