INTEX INTEX

Safety ladders for pools from 91 to 107 cm

128075
Art.
  • Safety ladder made of coated steel frame
  • Safety ladder with removable outer steps
  • Steps with anti-slip surface and improved support base
  • Protective caps to prevent damage to the pool liner
  • Easy to set up, dismantle and store

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€149.00
incl. VAT, free shipping
In stock

Only items left in stock

Product information

Safety entry ladder made from coated steel pipe for above ground pools, Safety ladders for pools from 91 to 107 cm. The anti-slip steps and the improved support base make it really convenient to get in and out of your pool and it improves safety and and stability.
The steps on the outside of the ladder can be taken off or folded up quickly and easily by opening two clamp connectors. This means children won’t be able to climb into the pool.
Maximum load is 136 kg.

Number of steps: 3 steps
Ladder suitable for pool height: 91 - 107 cm
Load capacity: 136 kg
Dimension: 117 x 84 x 151 cm
Suitable for salt water: yes

01 U-shaped top handrail
€10.90
incl. VAT, excl. shipping
02 Reinforcement (with latch)
€9.99
incl. VAT, excl. shipping
04 Fastener, as of model 2016
€1.49
incl. VAT, excl. shipping
05 Screw fitting, M6 x 45 mm
€0.99
incl. VAT, excl. shipping
06 A side (marked "A")
€13.90
incl. VAT, excl. shipping
07 A side (marked "B")
€13.90
incl. VAT, excl. shipping
08 Step, gray
€8.99
incl. VAT, excl. shipping
09 Anchor bushing for step
€0.99
incl. VAT, excl. shipping
12 B side (marked "A1")
€11.90
incl. VAT, excl. shipping
13 B side (marked "B1")
€11.90
incl. VAT, excl. shipping
16 Long screws for struts
€0.99
incl. VAT, excl. shipping
17 Screw fitting, M6x35 mm
€0.99
incl. VAT, excl. shipping
18 Base support
€8.49
incl. VAT, excl. shipping
01 U-shaped top handrail
€9.99
incl. VAT, excl. shipping
02 Reinforcement with latch
€9.49
incl. VAT, excl. shipping
03 Top part with locking system
€8.99
incl. VAT, excl. shipping
04 Fastener, as of model 2016
€1.49
incl. VAT, excl. shipping
05 Screw fitting, M6 x 45 mm
€0.99
incl. VAT, excl. shipping
06 A side (marked "A")
€12.90
incl. VAT, excl. shipping
07 A side (marked "B")
€12.90
incl. VAT, excl. shipping
08 Step, gray
€8.99
incl. VAT, excl. shipping
09 Anchor bushing for step
€0.99
incl. VAT, excl. shipping
12 B side (marked "A1")
€12.90
incl. VAT, excl. shipping
13 B side (marked "B1")
€12.90
incl. VAT, excl. shipping
16 Long screws for struts
€0.99
incl. VAT, excl. shipping
17 Screw fitting, M6x35 mm
€0.99
incl. VAT, excl. shipping
18 Base support
€8.49
incl. VAT, excl. shipping

FAQs from category Safety ladder:

Stainless steel pool ladders are rustproof, but not rust-resistant. When using pool ladders in a salt water pool, a zinc plate should always be used. The zinc plate serves as potential equalisation for stainless steel ladders in connection with salt water disinfection. It prevents rusting and helps prevent corrosion of your stainless steel ladder.

Mounting the zinc plate (art. no. 018259): Screw the zinc plate to the outside of your stainless steel ladder. The installation must be done on the inside of the pool and below the water level. Make sure that the zinc plate is renewed every season.

Caution

Caution! When using a swimming pool, following the safety instruction in the instruction manual and the maintenance instructions is a condition of use. To avoid drowning or other serious injury, please pay particular attention to unexpected access to the swimming pool by children under 5 years old. Please secure access to the pool and ensure that children are always supervised by adults while swimming.

Symbol photos

The pictures shown are just for reference, the actual product may differ.