INTEX
Entry ladder for pools up to 91 cm height
- For pools up to the a height of 91 cm
- Maximal weight 136 kg
- Steps with anti-slip surface
- Safety caps for protection of the pool foil
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Ladder with coated steel frame with anti-slip surface on the steps is used for pools up to the height of 91 cm. The maximum weight is 136 kg.
Number of steps: 3 steps
Ladder suitable for pool height: 91 cm
Load capacity: 136 kg
Dimension: 95 x 74 x 133 cm
Suitable for salt water: yes
FAQs from category Above ground pool ladder:
Stainless steel pool ladders are rustproof, but not rust-resistant. When using pool ladders in a salt water pool, a zinc plate should always be used. The zinc plate serves as potential equalisation for stainless steel ladders in connection with salt water disinfection. It prevents rusting and helps prevent corrosion of your stainless steel ladder.
Mounting the zinc plate (art. no. 018259): Screw the zinc plate to the outside of your stainless steel ladder. The installation must be done on the inside of the pool and below the water level. Make sure that the zinc plate is renewed every season.
Remove the ladder from the pool after each use, rinse it with clean tap water and dry it thoroughly with a soft, lint-free towel, paying attention to the areas in between.
Regularly check the dissolved salts in the water if an electrolysis system is used and make sure that the pH value and the disinfectant are set correctly. To avoid deposits on the underwater accessories, ensure that the water is circulated daily.
Avoid using water care products or shock chlorination in the vicinity of the ladder and ensure that no splashes or deposits form on or around the ladder.
Keep metal parts free of substances such as salts, dust and dirt and avoid contact with other metal parts, especially iron or concrete.
For salt water operation, you need a zinc plate for potential equalisation to prevent rust formation. Ensure correct installation and replace the zinc plate after each season.
The load capacity of ladders can vary depending on the model. It is between 136 kg - 150 kg. Check the product specifications of the model.
The maximum load weight must not be exceeded.
No, floor protection mats are not suitable for preparing the surface of pools. Floor protection mats made from materials such as: PE, are not stable enough. They serve as additional protection and comfort around the pool area. They can be placed under ladders, for example.