New
Steinbach Steinbach

Steinbach CleanCare Green Remover All-in-One

07555C05TD01
Art.
  • Removes green deposits from stone surfaces and facades
  • Cleaning without a pressure washer
  • Reliably removes moss, stains and algae
  • Effective and long-lasting effect
  • User-friendly application

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

* Mandatory Field

Out Of Stock

Only items left in stock

This product is available in home improvement stores and online shops.

Product information

Steinbach CleanCare Green Remover All-in-One is a highly effective stone floor cleaner that has been specially developed for the effective removal of algae growth and green deposits. With its high-quality formula, it ensures that stone floors and slabs, joints, facades and silicate plaster in outdoor areas shine again.

This cleaner is ideal for use on terraces, paths, concrete slabs, façades, walls, roof tiles and external cellar steps. It reliably removes algae, moss, green deposits and general soiling and offers a long-lasting preventative effect against re-infestation. Thanks to its self-acting action, it does not require rinsing and is therefore extremely user-friendly.

For best results, we recommend applying the cleaner with a foaming spray bottle. Remove coarse deposits manually before use and allow the foam to work until it dissolves. Brushing may be necessary to achieve optimum cleaning results. The effectiveness of the cleaner may vary depending on the surface and degree of soiling. Rely on this cleaner to thoroughly clean your stone surfaces and protect them in the long term.

07555C
GHS05, Ätzwirkung, aetzend
GHS09, Umwelt, umweltgefaehrlich
Danger

FAQs from category Special application:

Your chlorine level seems to be clearly too high - these tablets react up to a maximum concentration of 6 mg/l. Dilute the water taken and test again. If the values are too high, reduce them to a normal level (0.3 - 0.6 mg/l). After a shock chlorination the test is also not possible. Please wait a few hours.

Cause: Lime precipitates, not filtered particles
Solution: Adjust the pH level to 7.2 to 7.4 (by adding pH-Plus or pH-Minus). If there are suspended matters turn off the circulation pump and remove the flakes on the bottom with the pool cleaner after about 10-12 hours. Lime precipitates in the pool water (turbidity, shimmering white coating on the water surface, etc.) usually disappear shortly after adjusting the pH level and after the addition of a flocculants (while the filter system is running - WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!). Backwash thoroughly. Clean cartridge filter or replace by a new one.

Possible Causes: Faulty filter function, too many organic substances
Solution: Backwashing. If the filter system is calcified, use an acidic filter cleaner. If the filter system is ok, make a shock chlorination, meaning raise the chlorine level of the pool water up to 3 mg/l for a short time. The addition of flocculant is recommended as an additional measure (WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!). Backwash thoroughly. Clean cartridge filter or replace by a new one.

Possible cause: Too little disinfectant in the water, algae growth
Solution: Adjust the pH level to 7.2 to 7.4 by adding pH-Plus or pH-Minus. Let the filter system run continuously during the first 1-2 days. For disinfection with chlorine: Wipe dead algae from the pool walls. Remove algae from bottom with a brush and an aspirator. Make a shock chlorination, meaning raise the chlorine level of the pool water up to 3 mg/l. The addition of an algae protection is recommended. Backwash thoroughly. The added chlorine has degraded after a few days. Backwash thoroughly. If the water is not clear after 1-2 days, repeat the procedure. Cartridge filter system: Frequently clean or replace the cartridge. Alternatively, empty the pool completely, clean thoroughly and refill. After adjusting the pH value, treat the pool water with algicide to prevent new algae grow.

Possible cause: Iron deposits in the water
Solution: Adjust the pH level to 7.2 to 7.4 by adding pH-Plus or pH-Minus. Add flocculant. (WARNING: prohibited with cartridge filter systems and filter balls; the filter can stick!)  Extend the filter runtime, backwash the filter system thoroughly. In the case of a cartridge filter system, clean the cartridge regularly and replace it if necessary.

Possible cause: Inadequate chlorine dosing, non-degraded organic substances
Solution: Adjust the pH level to 7.0 to 7.4 by adding pH-Plus or pH-Minus. After a shock chlorination up to ca. 3 mg/l this smell will disappear after a short time.

Possible cause: Inadequate chlorine dosing, non-degraded organic substances
Solution: Adjust the pH level to 7.0 to 7.4 by adding pH-Plus or pH-Minus. If there is too little chlorine in the water, increase the chlorine content. If the chlorine content is too high, reduce the dosage or drain the pool water and refill with fresh water. Again, pay attention to the pH value.

Take a bucket of warm water, add the required amount of chemical for your pool and stir well. Then empty the bucket with the mixture evenly into the pool with the filter system switched on (circulating).

The lid of our chemical articles also serves as a dosing aid.

Our chemistry must be equipped with a safety lock for the protection of children. This requires some strength to open.

Safety data sheets are stored with the respective chemical article on our homepage. If you still cannot find what you are looking for, please contact us via our form on our helpdesk.

Important information

ALLGEMEINE HINWEISE: Dieses Produkt ist ausschließlich zu den angegebenen Zwecken gemäß Beschreibung zu verwenden. Die Wirkung setzt unmittelbar nach Verwendung ein. Alle Dosierangaben sind Erfahrungswerte und unverbindlich.

Keep container in a cool, dry, well-ventilated place protected from light and frost. Always transport and store the container in an upright, vertical position.

Caution

Gefahrenhinweise: H314 Causes severe skin burns and eye damage. H410 Very toxic to aquatic life with long lasting effects.

Sicherheitshinweise: P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P312 Call a POISON CENTRE/doctor if you feel unwell. P391 Collect spillage. P501 Dispose of contents/container to hazardous or special waste collection point.

Enthält: CAS 68424-85-1 Quaternäre Ammoniumverbindungen, Benzyl-C12-16-alkyldimethylchlorid (10g/100g)

Symbol photos

The pictures shown are just for reference, the actual product may differ.