Steinbach Steinbach

Filter pump SPS 175-1T

040090
Art.
  • Powerful filter pump
  • High-quality plastic
  • Self-priming pump with pre-filter
  • Integrated timer

Sold Out

The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

€289.00
incl. VAT, free shipping
In stock

Only items left in stock

Product information

Pool pumps are the powerhouse of the pool circuit. The Filter pump SPS 175-1T has a pump capacity of 20.040 l/h. The connection is 220-240V~ / 50Hz / 900 W. This filter pump can be used for pools with approx. 61.000 l water capacity. The hose connection is Ø 50 mm. The pump can be used up to a water temperature of 10°C - 35°C.

 

Salt water suitable: yes
Water capacity: 61.000 l
Pump power: 20.040 l/h
Power supply: 220-240V~ / 50Hz
Input power maximum: 900 W
Transformer: no
Delivery head: 15,00 m
Operating principle: self-priming
Pre-filter: yes
Timer present: yes
Connection size: Ø 50 mm
*Sound pressure level: < 70 dB(A)
Protection class: IPX5
Insulation class: F
Cable length to unit: 1,60 m
Water temperature: 10°C - 35°C


*Emission sound level comparable to a large household appliance

01 Prefilter
At the moment this product is not available
02 Drain screw, including seal
At the moment this product is not available
03 Line connection
At the moment this product is not available
04 O-ring seal (Ø 79 mm)
At the moment this product is not available
05 Threaded ring
At the moment this product is not available
06 Prefilter cover
At the moment this product is not available
07 Mechanical seal
At the moment this product is not available
08 16 μF capacitor
At the moment this product is not available
09 Fastening kit
At the moment this product is not available
10 Auxiliary tool
At the moment this product is not available

FAQs for Filter pump SPS 175-1T:

Set the timer on the filter pump to 24 hours. The filter pump is started and stopped with the external timer.
Make sure that you have previously activated the memory backup function of the timer. The following steps must be observed:

  1. Make sure that the power cable of the pump is disconnected from the power supply. 
  2. Use a PH1 Phillips screwdriver to remove the screws from the timer cover and remove the cover. 
  3. Pull out the plastic strip that can be seen underneath the battery. 
  4. Screw the cover back on again. The timer's memory backup function is now activated. 

Symbol photos

The pictures shown are just for reference, the actual product may differ.