Steinbach
Double stage filter unit Premium 100
- Sand- und Filter Balls Filteranlage
- Selbstsaugende Pumpe mit Vorfilter und Zeitschaltuhr
- Integrierte Anschlussmöglichkeit im Filterdeckel für UV-Desinfektionssystem
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The Double stage filter unit Premium 100 is the revolutionary combination of sand filter and Filter Balls.
1. Filter stage
Water flows into the sand filter, it is filtered in the quartz sand filter, then the water flows into the zeolite filter, located in the middle of the holder.
2. Filter stage
Filtering the water in the zeolite filter. The water goes into the side walls to the area of the Filter Balls, where it is filtered and led into the middle of the filter. From here, the clean water is sent on to the clean water tank. Here the water can also be disinfected by addition of *UV light (*optional).
The material of Filter Balls achieves an excellent filtering result and is characterised by its high dirt holding capacity. This makes it very suitable for a variety of technical applications, and in particular, water filtration.
Back wash function
With filter cleaning by means of the back wash function, pool water is forced across the clean water chamber from below into the sand area. This forces any contaminants located in the sand upwards, and pumps them into the channel through the 7 way valve.
| Hauptbild freigestellt |
| Bezeichnung |
| Wasserinhalt |
| Mindest Wasserdurchsatz |
| Farbe |
| Produktabmessung |
| Anschlussgröße |
| Heizleistung |
| Kühlung möglich |
| Eingangsleistung maximal |
| Kältemittel |
| Leistungsziffer COP Heizung |
Filter pump 040090
Sand and Filter Balls
Circulation power 10,000 l/h
Self-priming pump with pre-filter and Timer
Maximum water temperature 35 °C
220-240V~ / 50Hz / 900 W
7 way valve with pressure gauge
Tank Ø 540 mm mm
Connection adhesive D 540 mm
Ground plate
For pools up to 61.000 l capacity
In the filter cover integrated connection possibility for UV-disinfection system
Usable filter media:
Filter Balls 195 g (included in delivery)
Filter sand approx. 90 kg grain size 0.7 - 1.2 mm (not included in delivery)
FAQs for Double stage filter unit Premium 100:
Set the timer on the filter pump to 24 hours. The filter pump is started and stopped with the external timer.
Make sure that you have previously activated the memory backup function of the timer. The following steps must be observed:
- Make sure that the power cable of the pump is disconnected from the power supply.
- Use a PH1 Phillips screwdriver to remove the screws from the timer cover and remove the cover.
- Pull out the plastic strip that can be seen underneath the battery.
- Screw the cover back on again. The timer's memory backup function is now activated.