Steinbach
Pool equipment box
- Award winning design: reddot winner 2023
- High stability and robustness
- Weather and chemical resistant
- Sound and temperature insulating
- Easy assembly and installation
- Designed and developed in Austria
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The high-quality EPP technical box from Steinbach offers reliable protection for your pool technology and various pool equipment outdoors and is perfect for all types of above-ground pools.
The filter unit and filter pump fit perfectly in the 91 x 68 (L x W) storage solution and are therefore ideally protected from the weather in the garden.
The selected high-tech material convinces with enormously high stability, lightness, weather and chemical resistance as well as noise and temperature insulating characteristics.
With its height of 83 cm, the Steinbach pool technology box can be set up directly next to the pool, and the hose connections can be installed via the predefined cut-outs in the interior of the box.
This means that the pool technology is optimally housed and protected throughout the entire pool season, contributing to a visually clean overall appearance in the garden.
Our pool equipment box is compatible with the following filter systems:
Steinbach filter units:
- Filter unit Comfort 50 and Comfort 75
- Filter unit Active Balls 50 and Active Balls 75
- Filter unit Classic 310, Classic 400 and Classic 250N
- Filter unit Active Balls+
INTEX filter units:
- Krystal Clear sand filter unit SX925, SX1500, SX2100 and SX2800
- Krystal Clear sand filter unit & saltwater system QX2100
External dimensions / set-up dimensions: approx. 91 x 68 x 83 cm (L x W x H)
Max. Internal dimensions: 74 mm x 55 mm x 70 cm (L x W x H)
For all commercially available filter systems up to a size of: 74 x 40 x 70 cm (L x W x H)
Incl. cutting guides (45 mm + 75 mm)
Capacity: approx. 310 l
Designed and developed: Austria
Manufactured: Germany
FAQs from category Filter system accessories:
All Steinbach and INTEX filter systems (sand filter systems, cartridge filter systems & filter pumps) are suitable for salt water as long as the salt content in the water is below 0.5 % (salt electrolysis). Before winterising, clean the filter system thoroughly with standard bathroom cleaner, clear tap water and a lint-free cloth.
All filter systems and filter pumps have a sound pressure level* of < 70 dB(A).
*The emission volume is comparable to a large household appliance.
If the pressure is too low, the pre-filter is dirty and the pump is not getting enough water. Clean the pre-filter and check the suction line and the water level.
If the sand is newly filled in, or the sand is already very fine due to the use of several seasons, small sand particles may still be present. The solution is to backwash several times until the water comes out clear, or to fill in new sand.
The filter system should always be the first part in the water treatment system. The rest of the pool accessoires should only be connected after the filter system. A heat pump should ideally always be the last part in the water treatment system, so that the filtered, treated water flows through the heat pump and the path of the heated water into the pool is as short as possible.