Steinbach
Steel wall pool set Nuovo de Luxe II without filter unit
- Galvanised, coated steel sheath
- Safety ladder
- Winter-proof inner liner (approx. )
- Built-in skimmer and pool inlet nozzle
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
Steel wall pools of the "Nuovo de Luxe II" series are easy and quick to assemble. Not only the strong steel wall (approx. 0.40 mm), but also the winter-proof inner foil (approx. 0.40 mm) allow year-round use. Dismantling in winter is not necessary. The extra wide handrail and the solid support construction ensure more safety and years of enjoyment with this pool. With the inlet nozzle and skimmer set included in the scope of delivery, everything is already prepared for optimal circulation. Both swimming pool connection hoses and hose clamps are included in the set. A safety ladder, which is included, offers you a comfortable way to get in and out.
As an option, we recommend the *Steinbach Classic 250N filter system or the *Steinbach Active Balls+ filter system (*not included) for the "Nuovo de Luxe II" series up to Ø 460 x 120 cm. For the steel wall pool Nuovo de Luxe II with Ø 550 x 120 cm the *Steinbach filter system Classic 400 (*not included in delivery) is recommended. The filter systems are optimally matched to the respective steel-walled pools and ensure crystal-clear pool water.
This pool is suitable for free-standing installation, as well as for partial or complete in-ground installation. Please observe the installation instructions.
Pool shape: round
Product dimension: Ø 550 x 120 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation, part installation, freestanding
Water capacity: 25.600 l
Water filling height: 110 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: PVC
Material thickness steel wall: 0,40 mm
Liner thickness bottom: 0,40 mm
Liner thickness wall: 0,40 mm
Color of inner liner: sand
Assembly min. number of persons: 2 - 4
Assembly time approx.: 300 - 480 min
Filter unit: no
Number of skimmers: yes
Inlet nozzle: 1
Hoses: yes
Hose specification: 2x Fixed length 4,5 m, lugged 1,5 m each
Ladder: yes
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs from category Steel wall pools round:
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.