Steinbach
All-in-One steel wall pool set Grande oval
- All-in-one set at a bargain price
- Filter system included
- Basic cleaning set + chlorine starter set
- Fitting solar cover
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
The set contains everything you need for your own pool. With the steel wall pool Grande round, you have the luxury version of the steel wall pools. This series not only impresses with its strong steel wall of approx. 0.60 mm, but also with a winter-proof, strong inner liner of approx. 0.60 mm.
For further details on the products included in the all-in-one set, please refer to the scope of delivery.
Steel wall pool Grande:
Product dimension: 732 x 366 x 135 cm
Salt water suitable: no
Mounting options: ground installation, part installation, freestanding
Water capacity: 29.000 l
Material lining: steel
Liner thickness: 0,60 mm
Color of inner liner: blue
Assembly min. number of persons: 2 - 4
Assembly time approx.: 420 - 540 min
Number of skimmers: yes
Inlet nozzle: 1
Hoses: yes
Ladder: no
Filter unit Comfort 75:
Filter system:
Circulations capacity: 7.800 l/h
Boiler size (ø): 415 mm
Connection size: Ø 32/38 mm
Valve type: 7-way valve with pressure gauge
Usable filter medium 1: quartz filter sand
Quantity of filter medium 1: 25 kg
Usable filter medium 2: Filter Balls Filter Wool Flakes
Quantity filter medium 2: 700 g
Filter pump:
Power supply: 220-240V~ / 50Hz
Input power maximum: 550 W
Transformer: no
Pump capacity: 9.400 l/h
Operating principle: self-priming
Pre-filter: yes
Timer: yes
Head: 10,00 m
Basic cleaning set:
Set consisting of:
Bottom vacuum Duo (Venturi principle)
4 part aluminium telescopic pole (max. 220 cm)
Thermometer
Pool cleaning brush (width 25 cm)
Twin pack of hand scrubbers
ECO Leaf net
Chlorine Starter Set:
Set consisting of:
1,0 l Algaecide liquid
1,0 kg Chlorine granules
1,0 kg Chlorine tabs 200 g slowly soluble
1,5 kg pH - (minus) granules
1 Thermometer
50 test strips for pH-value and free chlorine
Pool care manual
Solar cover:
Dimension: 732 x 366 cm
Material thickness: 0,16 mm
Pool equipment box:
External dimensions/set-up dimensions: approx. 91 x 68 x 83 cm (L x B x H)
Max. Internal dimensions: 74 mm x 55 mm x 70 cm (L x W x H)
Incl. cutting guides (45 mm + 75 mm)
Capacity: approx. 310 l
Designed and developed: Austria
Manufactured: Germany
Heat pump Waterpower 8500:
Minimum water flow rate: 3.000 l/h
Dimension: 99 x 32 x 54 cm
Connection size: D 50/Ø 38 mm
Heating power*: 8.500 W
Cooling possible: yes
Input power maximum: 1.950 W
Power supply**: 220-240V~ / 50Hz
Water temperature: 5°C - 45°C
Timer present: no
Cable length to unit: 1,45 m
*variabel - depending on the environmental conditions
**single-phase alternating current
Solar shower Slim Line Deluxe:
Dimension: 25 x 13,50 x 225 cm
Capacity: 24 l
Max. Working pressure: 5 bar
Base dimension: 25 x 13,50 cm
Outdoor base element:
Dimensions: 101 x 63 x 4,50 cm
FAQs from category Steel wall pools oval:
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.