Steinbach
Steel wall pool set Grande round without filter unit
- Galvanised, coated steel shell
- Robust and strong construction
- Metal bottom rail and upright
- Winter-proof inner liner (approx. 0,60 mm)
- Built-in skimmer and pool inlet nozzle
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.
Product information
With the steel wall pool "Set Grande" you have the luxury version of the steel wall pools. The dimensions are . This series not only impresses with the strong steel wall with approx. 0,60 mm and a height of 135 cm, but also with a winter-proof, strong inner liner with approx. 0,60 mm. Dismantling in winter is not necessary. An extra wide handrail and a solid support construction ensure more safety and years of enjoyment with this pool. With the inlet nozzle and skimmer set included in the scope of delivery, everything is already prepared for optimal circulation. Both pool connection hoses and hose clamps are already included in the set. The delivery does not include the filter system. The installation can be free-standing as well as partially and completely built-in. Please observe the installation instructions.
Pool form: round
Product dimension: Ø 457 x 135 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation, part installation, freestanding
Water capacity: 20.000 l
Water filling height: 125 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Liner thickness bottom: 0,60 mm
Liner thickness wall: 0,60 mm
Color of inner liner: blue
Assembly min. number of persons: 2 - 4
Assembly time approx.: 300 - 480 min
Filter unit: no
Number of skimmers: yes
Inlet nozzle: 1
Hoses: yes
Ladder: no
Pool cover: no
Floor protection cover: no
Cleaning kit: no
FAQs from category Steel wall pools round:
For steel wall pools, the ground must be flat and level. The pool must not be set up on a slope or sloping ground. If the ground is a backfilled area, you will need a self-supporting foundation slab (e.g. concreted). The strength of the foundation and retaining walls must be decided by a master builder or structural engineer. The steel wall pool must not be placed on loose or sandy ground.
All models, except the steel wall pool of the "New Splasher Secure Series", are winterproof and can therefore be left standing in winter.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
It is not recommended to bring salt water and steel into contact with each other, as the salt water and salt water vapours can cause the steel to rust.
Most steel wall pools can be partially or completely installed in the ground. Please refer to the respective operating instructions.
To ensure that the pool remains stable, add the backfilling from an installation depth of 30 cm.
The additional concrete shell prevents damage to the steel shell when there is no water in the pool.
So that the liner can be placed over the steel wall (i.e. it overlaps it), the liner must be produced higher than the pool actually is.