
Steel wall pool set Nuovo de Luxe oval without filter unit
Robust, coated steel shell
Solid metal support construction
Winter-proof inner foil (approx. 0.40 mm)
Built-in skimmer and pool inlet nozzle
Sold Out
The selected product is currently not available. As soon as the product is on stock, we will send you an E-mail.

Product information
Steel wall pools of the "Nuovo de Luxe oval" series are easy and quick to assemble. Not only the strong steel wall, but also the winter-proof inner liner enable year-round use. The extra wide handrail and the solid side support construction ensure more safety and years of enjoyment with this pool. With the inlet nozzle and skimmer set included in the scope of delivery, everything is already prepared for optimal cleaning and circulation. Both swimming pool connection hoses and hose clamps for a filter system are already included in the set. The included ladder offers you a comfortable entry and exit. The pools in this series are suitable for free-standing installation, as well as for partial or complete ground installation (only with pressure protection).
Pool form: oval
Product dimension: 640 x 366 x 120 cm
Product set-up dimensions: 640 x 548 x 120 cm
Salt water suitable: no
Operational area: Outdoor
Mounting options: ground installation, part installation, freestanding
Water capacity: 21.900 l
Water filling height: 110 cm
Material outer lining: steel
Surface treatment: zinc
Material inner lining: vinyl
Material thickness steel wall: 0,40 mm
Liner thickness bottom: 0,40 mm
Liner thickness wall: 0,40 mm
Color of inner liner: blue
Assembly min. number of persons: 2 - 4
Assembly time approx.: 420 - 540 min
Filter unit: no
Number of skimmers: yes
Inlet nozzle: 1
Hoses: yes
Ladder: yes
Pool cover: no
Floor protection cover: no
Cleaning kit: no



FAQs from category Steel wall pools oval:
Depending on the model, the steel shell can either be completely sunken or partially sunken, but can also be free-standing. The steel wall pool is best placed on stable ground and on a horizontal, level and accessible surface. If you can stand on one leg without sinking in, the floor is stable.
You can find more information on preparing the substrate in the relevant operating instructions.
Yes, all steel wall pools are winter-proof and can therefore be left standing in winter. However, please note that the tips on correct winterization should be followed exactly.
It is essential to set up the pool when there is no wind. Gusts of wind make the construction of the steel wall difficult and can cause damage.
The use of steel wall pools with salt water can lead to rust problems that are not covered by the warranty.
Backfilling is only necessary if the pool is to remain without water for a longer period of time. Depending on the ground conditions and installation depth, a so-called slope failure can occur, which damages the pool wall. However, this situation can be prevented by backfilling with concrete.
The film must be produced higher so that it can be laid over the steel wall (i.e. it overlaps it). The overhang of the foil on the outer wall can be irregularly large despite correct tensioning. The excess film can be cut away after approx. 14 days, by which time the material will have fully expanded. Follow the instructions in the enclosed operating instructions carefully beforehand.